| INITIAL CLEANING 3/19/08 | 
  
  
      
      LLRM front panel | 
      
      all set - a sunny day, a shop-vac, an air compressor, and the
      modulator | 
      
      top is not too bad 
      5933's in center 
      monitor scope in lower left | 
      
      main mouse nest underneath | 
  
  
      
      after removing main nest | 
      
      some wire nibbles | 
      
      more nibbles | 
      
      still more nibbles | 
  
  
      
      wire nibble down in the hole - that'll be fun to repair! | 
      
      chassis stains | 
      
      speech amp stains | 
      
      scope HV area stains | 
  
  
    | Document before starting disassembly | 
  
  
      | 
      | 
      | 
      | 
  
  
      | 
      | 
      | 
      | 
  
  
      | 
      | 
      | 
      | 
  
  
      | 
      | 
      | 
      | 
  
  
    | Prepare to Remove Sides and Rear | 
  
  
      | 
      | 
      | 
      | 
  
  
      | 
      | 
      | 
      | 
  
  
    | Sides and Rear Removed | 
  
  
      | 
      | 
      | 
      | 
  
  
      | 
      | 
      | 
      | 
  
  
    | Remove HV relay, resistor board, and chokes to clean rear
      section | 
  
  
      | 
      | 
      | 
      | 
  
  
    | Repair Nibbled Wires & Rusty Switches | 
  
  
      | 
      | 
      | 
      | 
  
  
      | 
      | 
      | 
      | 
  
  
      | 
      | 
      | 
      | 
  
  
    | 5/1/08 Reassembled and ready for testing | 
  
  
      | 
      | 
      | 
      |